We provide high quality custom LED signs with 3D fabricated metal signs shell or acrylic signs shell. LED light signs are high brightness, good display effect, energy saving and good weather-proof, widely be used outdoor & indoor, fit for business (storefront, shop, office, restaurant, etc.), house, building, church, school, lobby and wall.
GET A FREE QUOTE CONTACT WITH USLED signs use the low-voltage, state-of-the-art LED as the light source, they have the characteristics of high brightness, long service life, bright colors and good weather resistance. Typically, The light color of the LED could be white, warm white, blue, red, green, yellow, pink, purple also could be full color RGB LED. It is one of the most common illuminated signs, be widely used exterior and interior, include:
Based on the Small Business Administration (SBA) reasch LED signs are the most effective, least expensive form of advertising for small businesses. Whether for businesses, churches or schools, indoor or outdoor, a high quality custom made LED signs gives you the ability to target a large, critical audience of potential customers already at your front door for far less than a traditional advertising campaign would cost.
Advertising value is traditionally measured in CPM, or cost per thousand impressions. In a typical American town, an LED sign might cost as little as 74 cents per 1,000 impressions — compared to over 22 dollars for television and 13 dollars for radio. Many organizations find they can reduce their advertising budgets for other mediums by better utilizing the LED signs to be their business sign.
Based on different material and process, we divided the LED signs into three models:
We recommend hiring professional installer to finish the installation job. Because needing to use the stud blots to fix on the backing wall, will drill holes on the wall for the stud bolts and cables also need to connect cables, professional installers can make the signage have much better final effect. Of course, if you have enough hands-on ability and is a licensed electrician, you can try to install it yourself.
The maintenance job is really simple. Only needs a soft cloth with seldom clean fresh water. It is not recommended to wipe with a cleaning solution containing alcohol or other organic ingredients to avoid damaging the outside of the shell, especially when the metal letters shell’s surface be painted, powder coated or plated.
Both the letters and logo are all could be the custom LED signs. A high quality custom LED signs provide a unique and eye-catching approach to any signage concept. Only the customize signs is really fit you, from the fonts, size, finishes, to lighting color, our high quality custom LED signs will be a part of your business or home well and are the ideal tools to help your business stand out.
With more than 15 years signs maker experience, we do know how to make the design and the effect in your dream to a perfect LED channel signs with amazing signage display effect. Whether it is indoor or outdoor, for shop or for building our custom LED signs will always so eye-cating.
GET A FREE QUOTEThe metal backlit signs have the fabricated 3D metal signs shell, stainless steel by default, LED be placed in the signs shell evenly as the light souce, light pass through the acrylic back-panel to make the signs have the halo effect. Fit for both exterior and interior business, home, building and wall very well.
One set of metal backlit signs consists of five parts:
Installation: Use the stuld bolts to fix on the backing wall by default.
The acrylic signs use the acrylic as the light-transmitting surface, have the 3D fabricated metal signs shell by default, also could be 3D fabricated acrylic signs shell or 3D CNC engraved acrylic signs shell, LED inside the signs shell as the light source. High brightness, long life, good weather-proof, the LED acrylic signs is perfect for the business or home, widely be used indoor and outdoor.
One set of LED acrylic signs consists of five parts:
Installation: Use the stuld bolts to fix on the backing wall by default.
LED resin signs use the epoxy resin as the light-transmitting surface, the liquid epoxy resin is poured into the 3D signs shell shell, fabricated metal signs shell by default, after cooling and solidifying, a round surface due to liquid tension is formed. The LED resin signs have the perfect water-proof and uniform light, thin and high brightness.
One set of LED resin signs consists of five parts:
Installation: Use the stuld bolts to fix on the backing wall by default.
Outdoor LED signs can grab more attention and are visible even at greater distances and let people know your business well. Our custom made outdoor LED signs have the good weather-proof, can work for you 7/24, remain highly visible even in direct sunlight.
Workflow
Here you will know our workflow well
Contact with us or fill our free quote form, we will arrange one of sales follow your quote and jobs
we can provide initial design service include the fonts, dimensions and signs option suggestion
Based on your request and the design file, we will give you the exact cost
Please print our quotation file, signature it and send us the scanned file
Please finish the deposit payment, then show us the bank slip etc. so that our accounting can confirm it
We will detail the design file of your signs, then we will send the file to you to show you all the details
When we get your confirmation of the detail design file, we will begin the production mediately
Your signs will be lighted 24 hours when we finish the production, so that most issue could be fix
We will take photos for your signage to show you the final products effect
When you confirm the products, please send us the balance payment, then show us the bank slip etc. so that our accounting can confirm it
We will call the delivery company to pick up your signage products and give you the waybill number so that you can track it
We provide one year free replacement to non-human damaged signs
Indoor LED signs are a great way to attract new customers due to their bright, clear and vibrant display effect They are the ideal tools to make your brand differentiate from competitors, attract more potential customers and help your business stand out.
If you have any additional questions about the LED signs or our service, feel free to contact with us.
Yes, we accept international order and we use the DHL for the delivery by default, DHL do international shipping.
We are signs manufacturers in China, our head office and factory are in Shenzhen, and we have an office in Shanghai.
We sell directly to retail consumers in a wide variety of industries including general contractors, graphic designers, corporate, government, education and retail clients. Very sorry, we do not provide trade discounts to sign companies for resale.
Depending on the type and quantity of ordered signs, we generally need about 15 business days to complete the production. We use the DHL door to door delivery service by default, which need about 3-5 days for the delivery. So the lead time would be about 18 business days.
Yes, we have the the UL certification, the certificate number is 20151008-E479471.
And on every indiviual part of the LED signs, we will add the UL labels/stickers for the USA clients.
Our LED signs are all customized, we do not have the standard sizes.
It is also a matter of personal preference. Some clients want the letters to be larger and more prominent. Others want it smaller, and more subtle.
If you don’t know the overall size of your signage, please tell us the overall size of the place you would install the signs, so that we can give you some suggestion.
Min. width of strokes is the Min. distance between the two edges of a stroke, measured perpendicular to the stroke center line.
This data determines whether the design could be the really signs products. For LED signs, whether the light is uniform is the biggest factor affecting the effect of the signage.
In general, for the LED signs we need the Min. width of the strokes reach 10mm(0.39″), but based on the design detail.
We will show you the sample case image and a free sketch.
If you need a 3D render images, you would be ask to pay for the design cost.
We prefer a vector format design file with all fonts and objects converted to “curves” or “paths”, if possible.
If you don’t know what’s the vector file, please visit: https://en.wikipedia.org/wiki/Vector_graphics
Other file formats such as .jpg or .png are bitmap, which could not give us enough detail to know the exact cost, only could be used to know the ballpark price.
Yes, you can use the custom font for your signage. Please send us the fonts file you needed. But not all the fonts fit to be the LED signs, especially those with thin strokes.
Our LED signs are all customized, so we do not have any standard fonts.
In general, we only look at whether the minimum width of the strokes and letters height meet the requirements, because these two factors determine the process realizability and whether the lighting effect of the final product can be uniform.
the photo of the wall or room where the sign will be installed helps us to know the surrounding better also helps us judge the best solutions for the installation.
Sorry, we can not give any price over the call, since our LED signs are all customized, different detail would cause different cost. We can not get enough detail over the call. Using our “Free Quote” form would be better.
We are very proud to provide you with a timely and professional customize signs service. Under normal circumstances you will receive our sales reply within one business day. If it is a big signage case, such like have dozens of different signage item, it might need 2~3 business days or even longer, but we will try our best to give you the price soon.
Well, you always can find a supplier with lower price, but mostly when you pay cheap then you will get the cheap. We are not the best choice if you only want to find a lower price, but we are the best signage supplier with good quality, good service with reasonable price. Our signage products worth every penny you pay.
You only can realize the difference when you the cheap and nasty signage products in your hand, sometimes even after a terrible experience, then it would be too late, you waste the money and time already. However, we have built our reputation on quality and will keep it that way.
That being said, if you do have a lower price, we would be happy to evaluate it for you. We will see if it is possible to match while maintaining our quality and durability standards, or we will tell you if we feel that something on the quote does not seem likely to live up to what you are expecting.
Considering the fluctuation of exchange rate, raw material price and labor cost, our quotation is usually valid for 30 days.
We used the “Buying Rate” of the Bank of China exchange rate by default.
Our payment term is:
Notice 1: We use the PAYPAL to accept the payment from credit card, The PAYPAL will charge 4.4% + usd$0.30 as the transfer fee, and our quoted fees are for products and delivery only, so if you want to use the credit card or PAYPAL to finish the payment, you would be asked to pay for the additional PAYPAL transfer fee. For example: if the amount of your order is $100, then you need to pay total: (100 + 0.3)/(100%-4.4%) = $104.92
Notice 2: If you want to use the credit card or PAYPAL to finish the payment, all the payment need to fit “PayPal Seller Protection”
Our signage products are all customized, we need to pay the cost for the raw material and labor cost. paying a deposit helps to ensure that both parties honour the agreement of the offer to purchase.
Yes, we use PayPal to accept credit card payments, by PayPal invoice mostly.
We use the PAYPAL to accept the payment from credit card, The PAYPAL will charge 4.4% + usd$0.30 as the transfer fee, and our quoted fees are for products and delivery only, so if you want to use the credit card or PAYPAL to finish the payment, you would be asked to pay for the additional PAYPAL transfer fee. For example: if the amount of your order is $100, then you need to pay total: (100 + 0.3)/(100%-4.4%) = $104.92
The import duty/tariff is charged by your local customs, if you have any question, please contact with them.
Yes, we will take photos for the final signage and send to you for your confirmation.
We will ship the final signage to you only after receiving your confirmation.
This cannot be done by default, as this will affect our production plan. In special cases, after you have paid the losses, we can produce according to the new plan.
Yes, but no payment would be refund.
After the 24 hours keep lighting test, most signage issue would be found so that we can fix them.
Yes, we use the DHL door to door delivery by default, they will deliver the signage for you.
we use the DHL door to door delivery by default, also use the fedex, UPS, and TNT etc. Once your signage ships, we will send you the waybill number so that you can track the cargo.
It depends on the delivery company, some addition cost might be charged by them.
First we will pack each individual part of the LED signs with pearl cotton and bubble film, then put all of them in a ply-wooden box lined with foam.
And all the accessories and the printed documen would be placed in the ply-wooden box too.
We are signage manufacturers in China, do not have any office or team out of China, so very sorry if the installation job is out of China we can’t finish it. But we do have some business partner in USA, Canada, Australia and Europe, if you can’t find the installer, we will try to help you to find one.
Yes, we will send the 1:1 layout template, wiring diagram and installation notes. So if you have an electrician’s card since you need to connect the wires, you can install it yourself.
You need to prepare electric drills, electrical tapes, glass glue and soft cloths for cleaning.
We will provide:
We will provide:
In addition, the following optional accessories are available:
The AC transformer emits heat during work. We recommend that the AC transformer be placed in a ventilated position or in a power distribution box with air vents to facilitate heat dissipation and increase the service life of the AC transformer.
We provide three years free replacement to non-human damaged signs. We will produce and ship to customers for free.
Because the LED half-life, after about 2-3 years the brightness of the LED lighting might be too weak, we suggest you renewing the LED lighting at that time. But if you can accept the signage effect, don’t worry, the life-time of the LED lighting is more than 80k hours.
Just using the soft cloth with some fresh water is fine enough. If need to remove any dirt and pollutants gathered from the environment, please use a good dishwashing soap and fresh water, using a very very light brush like a soft toothbrush or even a towel. Please do not use any harsh or other chemicals, which might affect the signage finishes.
We are professional manufacturer and comprehensive signs company in China, provide customers with high quality signage products since 2003. We export our products to United States, Canada, British, Germany, Sweden, Australia, Spain, France and Portugal etc. since 2007, our products are very welcome to our overseas clients.
With more than 12 years international business experience and well understanding of international quality certification system for signs, we use the electronic components with CE, UL and factory ISO certificate, etc. to ensure our sign products safe and reliable.
Contact With UsWe do custom made LED signs professional
With over 15 years of successful experience and knowledge in produce signs, we do know how to produce signs well for the world.
Orders directly from manufacturers to reduce intermediate expenditure. Buy high-quality custom signs with more reasonable price.
We provide you with high quality signs produced by our experienced technicians using advanced machine and high quality raw materials.
Depending on the type and quantity of ordered signage products, we generally need about 15 business days to complete the signs production.
Provided with 1:1 layout template, stud bolts, nuts, installation diagram and other installation accessories per the needs of the customers.
Provided free one year non-human damage limited warranty, and also provides 2-5 years limited warranty policy with enrollment fees.
I cannot express enough the positive impact our new LED sign has made. The LED sign is awesome, the sign is a hit with all of our old and new customers -Thank you.
Burhan Goktas - Origin KebabsYour LED signs products and services are so great, you provided us with a first-class storefront signs, thank you very much, you are excellent supplier.
Rodney Brewer - MillersNo.7 Fuping Middle Road, Longgang District
Shenzhen, Guangdong, China
Zip: 518117
Office Hour: 9:00 – 18:00 Beijing Time, Mon-Fri
EMAIL
S3 We Plus, 5th floor, No.1367 of Dongfang Rd, Fudu Plaza
Shanghai, China
Zip: 200127
Office Hour: 9:00 – 18:00 Beijing Time, Mon-Fri
EMAIL
©Www.LedSignsNet.Com All Rights Reserved.